Sea state
Violent pitching in bad weather.
Sea water temperature
Rising cold water in several sea areas. Hot water discharges from power plants.
Noise
From bow thrusters, main engine vibrations and propeller running reversely.
Related Articles
-
seametrico.Sensors.Shaft Motor
||Performance management
The shaft motor is an electric motor delivering power to the shaft. The shaft motor is supplied with electrical...
-
seametrico.Performance.Data pre-processing.Spikes in data.Mean and variance
||Performance management
When setting up rules for removal of spikes it will be necessary to evaluate the mean and variance in...
-
seametrico.Performance management.Objectives
||Performance management
Automatic logging of data – Setting up a system where the continuously logged data are collected on disks or...
-
seametrico.Sensors.Draught
||Performance management
Draught information is given as manual input. At departure from port the draught forward and aft is taken from...
-
seametrico.Fouling.Problem
||Fouling, General info, Performance management
During service the ship will experience fouling on hull and propeller. The degree of fouling depends on many factors;...
-
seametrico.Sensors.GPS
||Performance management
The GPS gives information about the speed of the ship. The speed is measured above ground whereas the speed...
-
seametrico.Performance.Data pre-processing.Synchronisation of Parameters
||Performance management
More than 20 parameters are logged through the ship’s automation system. The timestamp for the logging has to be...
-
seametrico.Fouling.Hull surface roughness
||Performance management
An increase of underwater hull surface roughness will increase the hull frictional resistance of the ship while sailing. This...
0 Comments
